Afstellen dynamo/ Alternator adjustments Humvee

17 10 2011

Om je dynamo van de humvee goed in te stellen, moet je de volgende stappen doorlopen:

Start engine (TM 9-2320-280-10). 4. Raise engine speed above idle. 5. Put a load on the alternator by operating driving lights (TM 9-2320-280-10). 6. Using a multimeter, check alternator (15) output voltage. Connect black test lead to ground lead 3B (18). Connect red test lead to lead 5A (16). Output voltage should be 28 volts ? 0.5 volts. If adjustment is required, go to step 7. If no adjustment is required, go to step 11. 7. Turn adjusting screw (17) counterclockwise to increase voltage or clockwise to decrease voltage. 8. Turn off driving lights (TM 9-2320-280-10). 9. Return engine to idle. 10. Stop engine (TM 9-2320-280-10).

http://www.tpub.com/content/hummer/TM-9-2320-280-20-2/css/TM-9-2320-280-20-2_173.htm

http://www.tpub.com/content/hummer/TM-9-2320-280-20-2/css/TM-9-2320-280-20-2_174.htm


Actions

Information

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s




%d bloggers like this: